Guttermaster - Aluminium in construction

NBS SPECIFICATION GUIDE

Introduction

 

Creating a full NBS specification for Guttermaster product's has never been simpler.

Our step-by-step guide will enable you to create NBS Specifications in minutes.

The example shown is based on specifying a Rectangular Gutter, which has multiple options to select from. The specification process always follows a similar format to make life easier for you.

In an unlikely event of experiencing a problem using the Guttermaster NBS Specification feature; please contact us on 01706 869550 and ask for the technical department.

Getting Started

 

1. Select the product category.

Product Category
Select product required

2. Select the product you require.

3. Click NBS Specification found in the More Information navigation bar located on the right hand side of the screen.

Note: should more than one product type be available, select the specification sheet you want to create and then click Next.

Alternatively at the bottom of this guide you can select the product on which to base your NBS Specification.

Select NBS Specification
Add project info

Producing Your Specification

 

4. Click into the Project Info fields to add: Title, Elevation / Building Ref and Project Ref .

Note: when you create another specification the Project Info fields will be created automatically, to change any information click into the field and amend details.

5. Select the profile you require from the options presented.

Select profile
Select size

6. Select the size required from the options displayed, alternatively select User defined and enter your bespoke measurements.

7. Type and Thickness. In most instances this will be predetermined by size parameters completed in stage.

Select thickness
Select finish

8. Select the Finish you require.

Guttermaster products are available in any RAL or BS4800 colours or supplied Mill finished.

9. Select the preferred Fixing option.

Select fixing
Click preview

Checking, Printing and Amending.

 

10. Click preview to see the full specification before you print it out.

11. Click print or back if you need to make any amendments.

Print
Print Specification Guide

Create a specification (Product List)

 

Click a product below to start building your specification.

WALL CAPPING

 

Wall Capping